- TL;DR
- What a heat pump thermostat does differently
- How to set your heat pump thermostat
- Aux heat vs. emergency heat
- Aux lockout and compressor lockout, explained
- Choosing a thermostat for a heat pump
- Heat pump thermostat settings: a quick checklist
- Mini splits and VRF: different controls
- We see these thermostat problems the most
- Our perspective on heat pump thermostats
- When to call a technician
- Book a heat pump check in Los Angeles
- FAQ
- Sources
- Recommended

The right thermostat for a heat pump is one that is built for heat pumps: it has a reversing valve (O/B) terminal, controls your backup heat, and lets you keep the temperature steady instead of swinging it. Set it to Heat in winter and Cool in summer, leave Emergency Heat off unless the heat pump has stopped working, and let auxiliary heat come on by itself only when it is truly needed.
That is the short version. Below is the longer one: what each setting does, how to tell aux heat from emergency heat, what a lockout temperature is, how to check compatibility before you buy, and when to call a technician. We are LC Heating & Air, and heat pumps, mini splits and VRF systems are our specialty, so we see these thermostat mistakes in Los Angeles homes every week.
TL;DR
- Use Heat in winter and Cool in summer. Skip “Auto” changeover, and keep the fan on Auto.
- Aux heat turns on automatically as backup. Emergency heat is a manual setting for when the heat pump is not working. Do not use it just because it is cold.
- Set an aux lockout (a common target is around 35°F outdoors) so the expensive backup heat does not run in mild weather.
- Before buying, confirm the thermostat supports your exact system: heat pump only, heat pump with electric strips, dual fuel, or variable-capacity.
- Seeing “Em Heat” or aux heat run often is a sign to book a heat pump service visit.
What a heat pump thermostat does differently
A basic furnace thermostat has a simple job: call for heat or call for cooling. A heat pump thermostat has more to manage, because the same outdoor unit does both jobs by reversing the flow of refrigerant. The thermostat has to tell a reversing valve which way to go, and it often has to control a second source of heat as well.
That is why a heat pump thermostat has three jobs a standard one does not:
- Reversing valve control. Wires on the O or B terminal tell the system whether to heat or cool. A thermostat set up for the wrong one will heat when you ask for cooling.
- Staging. Many heat pumps run in more than one stage. The thermostat decides when to call the second stage.
- Backup heat control. If your home has electric resistance strips or a gas furnace as backup, the thermostat decides when that backup may turn on.
Not sure whether you even have a heat pump? A heat pump can be identified by O, B, or O/B terminals on the control board, or by watching whether the outdoor unit runs when the system is heating. A gas furnace with a separate air conditioner will not run the outdoor unit in winter.
How to set your heat pump thermostat
Heating and cooling mode
Choose a comfortable set point and leave it there. According to New York State’s heat pump operating guide, sudden changes of 3°F or more can trigger inefficient catch-up operation. The same guide says to use Heat in winter and Cool in summer rather than an “Auto” changeover mode, which can cause the system to battle itself between heating and cooling.
This matters in Los Angeles, where a 55°F morning can turn into an 80°F afternoon. Auto changeover will happily heat at 7 a.m. and cool at 2 p.m., and on shoulder-season days it can do both in a few hours. Pick a mode for the season and change it by hand when the weather really shifts.
Fan setting
Start with the fan on Auto. The same state guide notes that running the indoor fan continuously can degrade heat pump performance. In cooling, constant fan can also push moisture from the coil back into the air.
The “Dry” mode
Some thermostats and most mini split remotes have a Dry mode. In humid summer climates, the dry setting may give better comfort at lower cost than Cool, according to the Northeast Energy Efficiency Partnerships consumer guide. Coastal Los Angeles has humid days, so it is worth trying if your unit has it.
Schedules and setbacks
This is where heat pumps differ most from furnaces. A furnace can drop the house 8 degrees overnight and fire hard in the morning. A heat pump does best when the temperature stays steady. A deep setback can leave the heat pump too far behind in the morning, and the thermostat may then call on backup heat to catch up. The Bonneville Power Administration’s guidance also warns that aux heat control should not rely only on the thermostat’s adaptive recovery, and that frequent manual adjustments can encourage unnecessary strip-heat use.
A practical schedule for most homes:
- Keep a small setback of 2 to 3°F while you sleep or are away, not 8 or 10.
- Use a gradual morning ramp if your thermostat supports it.
- Avoid bumping the set point up 5 degrees when you walk in cold. It feels faster, but it often only wakes up the backup heat.
For general winter setpoint ideas, see our guide to recommended thermostat settings for winter.
Aux heat vs. emergency heat
These two get mixed up constantly, and the difference affects your electric bill.
| Auxiliary (aux) heat | Emergency (em) heat | |
|---|---|---|
| How it starts | Automatically, when the heat pump cannot keep up | Manually, when you switch the thermostat |
| Heat pump (compressor) | Runs together with the backup | Usually off; backup does all the heating |
| Purpose | Help on cold days or during recovery | Keep the home warm when the heat pump is not working |
| How often you should see it | Occasionally on the coldest days | Rarely, ideally never |
Google’s Nest support page puts it plainly: auxiliary heat can operate automatically as needed, while emergency heat has to be turned on manually if the primary system is not working or not keeping your home warm enough. The same page says you typically should not need emergency heat often, and regular use may mean your system needs servicing.
One wrinkle: on some dual-fuel setups, the labels change. A Nest Thermostat E configured for dual fuel shows “Alt heat” instead of aux heat, and has no Emergency Heat option at all, because it switches to the alternate source automatically. Your thermostat’s wording may differ, so check your manual for what “Em Heat” means on your model.
When to use emergency heat
Use it in one situation: the heat pump itself has stopped heating. Common examples are an outdoor unit that is iced over and not clearing, a unit that will not start, or a compressor that has failed. Em heat then keeps the house warm until someone can repair it.
Do not use it because it is chilly, because the house feels slow to warm up, or because you want faster heat. In an electric-strip system, em heat is the most expensive way to heat your home. If you flip it on and the house is warm but the system is not truly working, you can run up a large bill before you notice.
If the heat pump is not heating and you are not sure why, our guide to what to check when a heat pump is not heating covers causes, quick fixes and when to call.
What it means if aux heat runs often
A properly sized heat pump should provide year-round comfort without much backup. The Consortium for Energy Efficiency notes that an existing heating system should turn on only if needed to maintain comfort. If your aux indicator is on most of the winter, one of these is usually the cause:
- The thermostat has no lockout, so aux runs in mild weather.
- The set point is changing too much, so the system keeps trying to catch up.
- Low refrigerant, a dirty coil, or a failing component is cutting the heat pump’s output.
- The heat pump is undersized for the home.
The first two are settings. The last two need a technician.
Aux lockout and compressor lockout, explained
Two “lockout” settings appear on better thermostats, and they do opposite things.
Aux heat lockout blocks the backup heat above a certain outdoor temperature. Copeland’s Sensi explains that this feature locks out auxiliary heat and uses only the heat pump when the outdoor temperature is above your chosen set point. Its purpose is simple: in mild weather, the heat pump is far cheaper to run, so the thermostat should not call for strips or a furnace.
Compressor lockout (sometimes called heat pump lockout) works from the other direction. It stops the compressor below a very low outdoor temperature, so the backup does all the work. This is mainly used in dual-fuel systems, where a gas furnace is cheaper or more effective than the heat pump in deep cold.

For aux lockout, the BPA guidance calls reliable lockout of auxiliary heat in relatively mild weather important, and uses 35°F as the PTCS reference point. That is a good starting number for many homes. Modern cold-climate heat pumps can work well below that, so a lower lockout may be right for yours. Your installer should confirm the number for your specific equipment.
A note for Los Angeles: our winters rarely get near the temperatures where backup heat is truly needed. Most of our heat pump homes should see little aux heat. If yours is running often at 50°F outside, that is a symptom worth investigating, not a normal winter.
Set the backup lower than the heat pump
If your backup system has its own thermostat (common with older gas furnaces paired with a heat pump), the New York state guide says to set the backup 3 to 5°F below the heat pump’s set point. That way it turns on only if the heat pump cannot maintain the temperature on its own.
Dual fuel needs careful setup
In a dual-fuel system, the heat pump and furnace must not run at the same time. Honeywell’s documentation warns that these systems must be configured so the heat pump and furnace do not run together, or the coil can be damaged. The switchover temperature is often set at the factory and may not suit your home. Our article on dual fuel heat pumps and the default switchover explains what to check.
Choosing a thermostat for a heat pump
There is no single best thermostat for every heat pump. The best one is the one that matches your equipment. Work through these questions in order.
1. What kind of system do you have?
The main types:
- Heat pump only, no backup.
- Heat pump with electric strip heat (aux and em heat on the thermostat).
- Dual fuel, a heat pump with a gas furnace.
- Variable-capacity or inverter systems, with modulating compressors.
- Ductless mini splits, usually run with the manufacturer’s remote or app.
Each needs a thermostat that is set up for it. Comfort and efficiency suffer when the thermostat does not match.
2. Is it truly compatible?
“Heat pump compatible” on a box does not always mean enough. ComEd’s controls guide cautions that not all thermostats labeled heat pump compatible work with dual-fuel or variable-capacity systems, and recommends checking with the manufacturer or distributor. The same guide notes that proprietary thermostats can offer the best performance, while third-party thermostats on fully modulating systems may limit stages and hurt efficiency.
If you are considering a Nest, Google’s help site offers a compatibility checker and a custom wiring guide. It also states that Nest thermostats are not compatible with high-voltage or proprietary systems, and some systems need a C wire or a power connector. Professional installation is recommended for dual-fuel systems because incorrect setup can damage the equipment.
3. Does it have the features that matter?
For a heat pump, these features are worth more than a pretty screen:
- Aux lockout by outdoor temperature (and ideally an outdoor sensor or reliable local weather data).
- Adjustable aux differential, so you decide how far the room must fall before backup starts.
- Installer test mode, so stage 1, stage 2 and emergency heat can be tested. The BPA guide points to test mode as a way to verify these stages.
- Smart recovery that does not fire strips. Look for a setting that favors the heat pump for recovery.
- Dual-fuel or balance-point control, if you have a gas furnace backup.
The BPA guide also puts touch-screen thermostats at around $100, and notes that some newer models have outdoor sensors. Thermostat prices vary by brand and features, so use that as a rough floor rather than a quote. Replacement cost is more than the device: wiring checks, a C wire or adapter, and configuration of the aux and reversing valve settings are part of the job.
4. Who is installing it?
Thermostat swaps look easy. For heat pumps, the risk is in the settings behind the screen, such as whether the reversing valve is energized in cooling (O) or heating (B), whether the system has one or two stages, and whether aux is wired as a separate stage. A wrong choice can make the system heat when you want cool, or run strips all winter without any visible error.
If you are weighing the DIY route, a guide to smart thermostat installation helps you decide what is safe to do yourself and what to leave to a professional. For wiring basics, we have also written about thermostat wiring mistakes to avoid and wiring tips for a thermostat upgrade.
Heat pump thermostat settings: a quick checklist
- System type: set the thermostat to match (heat pump, with or without backup, single or dual fuel).
- Reversing valve: confirm O or B is configured correctly.
- Mode: Heat in winter, Cool in summer. Avoid Auto changeover.
- Fan: Auto.
- Set point: steady, with small setbacks of a few degrees.
- Aux lockout: enabled, with a value your installer approves (35°F is a common reference point).
- Backup offset: 3 to 5°F below the heat pump set point if the backup has its own thermostat.
- Emergency heat: off, except during a heat pump failure.
- Test: run the installer test mode and confirm stage 1, stage 2 and em heat respond as expected.
Mini splits and VRF: different controls
Ductless mini splits do not use a wall thermostat in the usual way. Each indoor head has its own remote or app, and some have a built-in sensor. Settings to know: use Heat or Cool rather than Auto when you can, try Dry on humid days, and avoid large temperature jumps. Where a mini split zone is controlled by a third-party wall control, check compatibility with the manufacturer first.
Commercial VRF systems use central or zone controllers, with schedules and lockouts programmed at commissioning. If a VRF zone is short-cycling or not following the schedule, it is usually a controls or commissioning issue, and it should be reviewed by a technician familiar with that system.
We see these thermostat problems the most
The house is warm, but the bill is high. Often the thermostat has been left on emergency heat after a cold snap, or the aux has no lockout.
Cooling mode runs heat. The O/B setting is reversed, usually after a thermostat swap.
The system short cycles. This can be a placement issue (thermostat in direct sun or near a vent), a wiring issue or a refrigerant issue.
The thermostat shows “Aux” on mild days. Lockout is off, the set point jumped, or the heat pump is underperforming.
New smart thermostat, no power. There is no C wire. Some systems need an adapter or a new thermostat wire pulled.
If the thermostat is configured correctly and the symptoms remain, the thermostat is not the problem. The problem is in the heat pump itself.
Our perspective on heat pump thermostats
After 20 years in Los Angeles, our view is simple: the thermostat is the cheapest part of a heat pump system and the part most often set wrong. We regularly find homes where a good heat pump was paired with a thermostat that was configured as a basic conventional system, so the equipment never ran the way it was designed to.
We also see the opposite problem: homeowners told they need a whole new system when the real issue was a lockout setting, a wiring fault or an emergency heat switch that was left on. We believe in diagnosing first. If a thermostat setting or a wire is the problem, we say so and fix that, at a flat-rate price you hear before work begins.
A few rules we follow:
- Match the thermostat to the equipment, not the other way around. With variable-capacity heat pumps and multi-zone systems, the manufacturer’s own control is often the right call.
- Set lockouts on day one. It is a five-minute setting that can save real money.
- Test every stage before we leave. A thermostat that has not been tested in em heat, aux and cooling is not finished.
- Treat frequent aux or em heat as a symptom. It is the system asking for service.
Heat pumps, mini splits and commercial VRF systems are our focus, and we would rather teach you to set your thermostat right than sell you something you do not need.
— Leo
When to call a technician
Call for service if you notice any of the following:
- You have had to switch to emergency heat to keep the house warm.
- The outdoor unit is frozen over and does not clear.
- The heat pump runs constantly but the house does not reach the set point.
- Aux heat shows on most days, even in mild weather.
- The thermostat is blank, resets or shows an error after a swap.
- The system heats when set to cool, or cools when set to heat.
If the air coming from the vents feels cool in heating mode, that is not always a fault, because heat pump air is warmer than the room but cooler than furnace air. But a real loss of heat needs a diagnosis rather than a guess.
Book a heat pump check in Los Angeles
We repair, tune and install heat pumps, mini splits and VRF systems across Greater Los Angeles, including Hollywood, Beverly Hills, Bel Air, Brentwood and Pasadena. Our service call starts at $125, and repairs are quoted at a flat rate before we begin, with no surprise diagnostic fees and no pressure to replace a system that can be fixed. See our heat pump repair and service page or call (323) 970-3113 to book.

Thinking about a new system? Heat pump installation on our price list runs from $5,500 to $12,000, and mini split installation from $3,500 to $20,000, depending on size and number of zones. Details and options are on our installation and financing page. A yearly HVAC maintenance plan ($180 to $250 per year) includes the kind of settings and stage checks described above.
FAQ
How should I set my heat pump thermostat?
Use Heat in winter and Cool in summer, keep the fan on Auto, and hold a steady temperature with only small setbacks. Avoid jumps of 3°F or more, which can trigger inefficient catch-up operation. Turn on an aux lockout if your thermostat offers it.
What is the difference between aux heat and emergency heat?
Aux heat is automatic backup that joins the heat pump when it cannot keep up. Emergency heat is a manual setting you switch on if the heat pump is not working at all. If you use emergency heat regularly, have the system serviced.
What is the best thermostat for a heat pump?
The best one is built for your exact system: heat pump only, electric backup, dual fuel or variable-capacity. Look for aux lockout, an adjustable differential and an installer test mode. Check compatibility with the manufacturer before buying, and have a technician configure it if you have dual fuel.
What temperature should I set for aux heat lockout?
A common reference point is around 35°F outdoors, so backup heat stays off in mild weather. The right number depends on your heat pump’s capacity and the type of backup. Ask your installer to confirm the value for your equipment.
Can I use a regular thermostat with a heat pump?
Usually not. A heat pump needs a thermostat with a reversing valve output (O or B) and, if you have backup heat, aux and emergency heat control. A furnace-only thermostat cannot run those correctly.
Sources
- Air Source Heat Pump operating fact sheet, NYSERDA
- Getting The Most Out of Your Heat Pump, NEEP
- Emergency Heat for heat pump systems, Google Home and Nest Help
- Nest thermostat compatibility, Google Home and Nest Help
- Wyze Thermostat User Guide
- Advanced Features, Honeywell Home
- Notes on Auxiliary Heat Controls and Thermostat, Bonneville Power Administration
- Controls Guide Air Source Heat Pumps, ComEd
- You Installed an Air Source Heat Pump, Consortium for Energy Efficiency
- Aux heat settings, Sensi
Recommended
Leo, Owner & Lead Technician at LC Heating & Air
Leo leads LC Heating & Air as an owner-operator and holds California CSLB C-20 HVAC license #1073586. His guides focus on practical diagnostics, safe repair decisions, and clear advice for Los Angeles homeowners.






